华为AC+AP无线配置方法
组网示意图：
前提条件：
1)所有设备工作正常
2)依据上述组网建立测试环境
1)正确配置AC使AP发放SSID:“SSID-Temp1”、“SSID-Temp2”和“SSID-Temp3”，且对应业务vlan为：vlan-1，vlan-2，vlan-3；
配置Switch
[Switch]vlan batch 100 101 102 103
[Switch]interface GigabitEthernet0/0/1
[Switch-GigabitEthernet0/0/1]description Link-to-AP
[Switch-GigabitEthernet0/0/1]port link-type trunk
[Switch-GigabitEthernet0/0/1]port trunk pvid vlan 100
[Switch-GigabitEthernet0/0/1]port trunk allow-pass vlan 100 101 102 103 [Switch-GigabitEthernet0/0/1]quit
[Switch]interface GigabitEthernet0/0/2
[Switch-GigabitEthernet0/0/2]description Link-to-AC
[Switch-GigabitEthernet0/0/2]port link-type trunk
[Switch-GigabitEthernet0/0/2]port trunk allow-pass vlan 100 101 102 103 [Switch-GigabitEthernet0/0/2]quit
配置AC
1.配置接口和VLAN信息，AC为DHCP Server，为AP和client分配地址
[AC]vlan batch 100 101 102 103
[AC]interface GigabitEthernet0/0/1
[AC-GigabitEthernet0/0/1]description Link-to-SW
[AC-GigabitEthernet0/0/1]port link-type trunk
[AC-GigabitEthernet0/0/1]port trunk allow-pass vlan 100 101 102 103
[AC-GigabitEthernet0/0/1]quit
相关资源：华为AC和AP的配置及升级降级方法.doc
